|
Cabinet Construction and
Refrigeration System:-
The cabinet of Labtop Chambers are
insulated with high density CFC free Poly Urethane Foam.
Interior of chamber is mirror finish stainless Steel (304 SS,
0.8 mm thick). The exterior is white powder coated (1.0 mm
thick) mild steel and the door has a magnetic door gasket with a
keyed door lock. Stainless steel trays are provided for storage
inside. The cooling is effected by a hermitically sealed
compressor of high quality. GMP models are in total stainless
steel (Inside S. S 316 with mirror finished and outside. S 304
dull finish.) is also manufactured by Skylab.
| Cat. No. |
LIS-125 |
LIS-125 R |
LIS-125 P |
LIS-125 PR |
| Temperature Range |
Amb+5º C to 60º C |
5º C to 60º C |
Amb+5º C to 60º C |
5º C to 60º C |
| Temp Accuracy |
± 0.5ºC |
± 0.5ºC |
± 0.5ºC |
± 0.5ºC |
| Temp Control |
Micro controller |
Micro controller |
PLC controller |
PLC controller |
| Std.platform Size |
420x420 mm |
420x420 mm |
420x420 mm |
4420x420mm |
| Max.Capacity |
1000 ml |
1000 ml |
1000 ml |
1000 ml |
| Shaking Speed |
30-400 RPM |
30-400 RPM |
30-400 RPM |
30-400 RPM |
| Shaking Motion |
Orbital |
Orbital |
Orbital |
Orbital |
| Shaking Amplitude |
25 mm |
25 mm |
25 mm |
25 mm |
Optional Accessories:
Variety of Top Board assemblies for holding
conical flask of different sizes given below.
100 ml x 36 flasks
250 ml x 25 flasks
500 ml x 16 flasks
1000 ml x 9 flasks
Chamber illumination with fluorescent tubes or Ultra Violet
Lamps. 99 Hrs. Programmable Micro controller based cyclic timer
for regulating illumination condition
Safety controller
Dedicated safety controller
with separate sensor to switch off the power supply in case of
overshoot and undershoot of temperature giving audio visual
alarm.
Data scanner
Data Scanner 4 point
temperature and 4 point humidity scanner complete with Sensors
and printer interface and data storage facility.
Software
CFR 21 Part 11 compliance web based
communication software for data management. Complete with RS 485
multi dropping to monitor multiple chambers to one software.
Temperature & Humidity sensor
Electronic capacitance type Temperature&
humidity sensors, which will avoid wick, cup and water.
Printer Interface
Facility to store, print records on printer
with set values, Process values, date and time with variable
print time interval. Data storage facility to print the data
online and off line, suitable for 80 col. Dot matrix printer.
Documentation : For
GMP complaint models LABTOP offers DQ IQ, OQ and PQ validation
with documentation, reports, calibration and test certificates.
Calibration: The
equipment is calibrated with the help of master calibrator,
which is certified for its accuracy by Electronics Regional
Testing Laboratory (ERTL West) Government of India recognized
testing laboratory with traceable reference to National Physical
Laboratories (NPL).
|
Shaking Incubator
